DriveRight VSS Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Autonavigationssysteme DriveRight VSS herunter. DriveRight FAQ - CarChip DriveRight Online Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
DriveRight
Frequently Asked Questions
General Installation
What is the difference between DriveRight 500 and DriveRight 600?
The most obvious difference is the DriveRight 600 stores up to 600 trips instead of 500 trips.
Other features that DriveRight 600 includes are: The ability to record two digital inputs connected
to the vehicle, the ability to record GPS inputs, the ability to have a driver user list so drivers will
not be able to log on with a "ghost" driver ID. Also the DriveRight 600 records speed for 20
seconds before and after a hard deceleration or accident whereas the DriveRight 500 only
recorded speed for the 20 seconds before.
My new DriveRight 600 will not connect to my existing wiring I used with my DriveRight
500.
That is correct. The new DriveRight 600's connector has more pins then the DriveRight 500.
Therefore you will need the Upgrade Adapter, part # 8161. This will connect the existing wiring to
the new DriveRight 600
How many different ways can you install the DriveRight to a vehicle?
There are actually four different ways. The easiest and preferred installation is the OBD
installation. The other three are the VSS installation, the General Duty installation and the Heavy
Duty installation
.
How do I know what installation to use?
If your vehicle was manufactured in 1996 or after it will have an OBDII port. If this is the case then
you can most likely use the OBD DriveRight installation. In this installation the OBD harness
cable will just plug into this OBDII port. There are a few cases where this port will be present but
will not be compatible with the OBD install kit. Please contact Technical support at 510-732-7814
to make sure your vehicle is compatible. If your vehicle is not compatible with the OBD installation
then the VSS installation will be the next choice. In this installation you use the VSS wire as the
input signal. You can find where the VSS wire is on your vehicle at the www.rostra.com
website.
If your vehicle does not have the VSS wire then you will need to go with the General Duty or
Heavy Duty installation. These installations use a magnet that is attached to your drive shaft that
passes by a speed sensor that is mounted to vehicle. The heavy Duty is used in larger vehicles or
in vehicles that will be used in rugged terrain.
Seitenansicht 0
1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - DriveRight

DriveRight Frequently Asked Questions General Installation What is the difference between DriveRight 500 and DriveRight 600? The most obvious diffe

Seite 2

2. Select Contents/ Index (Field 2)/ Remote Modem Setup-using HyperTerminal. The help file explains the procedure in detail. I cannot download my D

Seite 3 - Display

No you must have a DriveRight 600 to use the GPS module. After connecting my GPS module and antenna it does not function. The Fleet Management softwa

Seite 4

Can I differentiate the vehicles on which the DriveRight is used? Yes, but only with the Fleet Management Software. Every DriveRight has an internal I

Seite 5 - Battery / Power

Do I have to put the DriveRight in a visible location? No, the DriveRight can be located so that the driver will not know it is being used. It would

Seite 6 - Software

Display My display is missing segments. Sometimes heat can cause adverse reactions in the LCD display. Remove the DriveRight to a cool location for

Seite 7

proper wire: http://www.rostra.com. Select Technical Support when you get to the home page and then fill in year, make and model. It will give you the

Seite 8

skidding? You will have to drive the vehicle and observe the readings that occur during normal operation before you can determine what is excessive.

Seite 9

ignition. "Unswitched" means a source that is not turned off by the ignition key or other switch. Check the fuse and wiring to primary power

Seite 10 - GPS Module

active mode.. Check that the correct serial port is selected. If you have other programs running which use the serial port, such as the Palm HotSync M

Seite 11 - Access Code

How do I Export DriveRight Data using "other export commands"? Use the Export "data type" command to export the data in the databa

Seite 12

7. Default connection to the FTP site is active mode. Some FTP sites allow only passive mode connections. (Check the passive mode check box in that c

Kommentare zu diesen Handbüchern

Keine Kommentare